To send jobs to the Apogee System via the Internet, you should use a input channel. Before you can do this, you must first create a print queue to the TCP/IP input channel on your Windows Server. You will need to set up a name and port number. You will also need to share this queue on your network.
The TCP/IP print queue is not automatically created when you install Apogee. You need to create it yourself using the Adobe PostScript driver, as described below.
You first need to create a port:
1 Choose Start > Settings > Printers.
2 Choose File > Server Properties.
3 Choose the Ports tab, and click Add Port.
4 Double click Standard TCP/IP Port.
5 Click Next.
6 Enter the IP address of your server in the Printer Name or IP Address field.
TIP: If you do not know the IP address of your Apogee Server, choose Start > Run on the Apogee System, type cmd in the Open field, and click OK. Then type ipconfig and press Enter.
7 Click Next.
This process may take a while.
8 Choose Custom, and click Settings.
9 Leave the protocol on Raw, enter the port number you specified for Apogee, and click OK.
10 Click Next.
11 Click Finish.
12 Click Close twice.