Adding/Removing Apogee Systems
Additional Apogee Systems may be available on your network but may not be visible. This happens when the Apogee Client and Server applications are not installed on the same network segment, but are connected via a router. In order to access these Apogee Systems, you first need to manually add them to the list of systems displayed in the Logon dialog box. To do this, you must know the IP address of the Apogee System you want to add.
To manually add an Apogee SystemÂ
1 Start the Client.
NOTE: If the Client is already open, choose File > Log Off to access the Logon dialog box. You will have to close your current System connection.
2 From the Apogee Logon dialog box, click the cogwheel button and choose Add System.
 |
The Add System dialog box is displayed.
3 Enter the Apogee System IP address or host name, and click Find.
The Client starts to search for the specified system on your network. When it is found, the system name is displayed in the dialog box.
4 Click Add to add this system to the list,
To remove an Apogee SystemÂ
1 Start the Apogee Client.
NOTE: If the Client is already open, choose File > Log Off... to access the Log on dialog box. You will have to close your current System connection.
2 Select the Apogee System you want to delete from the list, click the cogwheel button and choose Delete System.
|
NOTE: You can only remove Systems that were added manually, as described above.
3 Click OK to confirm this operation.
The selected system is removed from the list.
doc. version 13.1.1