TCP/IP Settings
 |
You can access these settings:
•When creating Parameter Sets (see “Managing Parameter Sets”). Here, you will see a ‘Lock in Production Plan’ check box (selected by default). If this check box is selected, the settings will be initially locked in the Settings pane. If this check box is deselected, the settings can be edited in the Settings pane.
•In the Settings pane, in the Plan tab of the Job Manager and the Ticket Editor. The settings may be initially locked, as indicated by the Lock icon. If you edit the job, you can unlock them as described in “Settings Pane (Ticket Editor)”.
Name
The name of the Parameter Set as it will appear in the Production Plan. When you create a Parameter Set, you should specify a Parameter Set name. You can always change this name later by editing the job, choosing the Parameter Set from the Task Processor in the Plan tab, and unlocking the settings in the Settings pane.
Port Number
Type a unique Port number that you want to use for the TCPIP input channel. Choose from a range between 1024 and 65535. Use only an even port number (e.g. 4000, 4002, 4004), not an odd one. This is because odd port numbers are used to return data. By default, Port 4000 is used.
Spooled Printing
Enable or disable spooled printing. The spooler temporarily saves the input data to disk to release the front-end workstation. By default, this option is not selected.
NOTE: The Spooled Printing option is only available when there is no Keep Results action on the TCP/IP component in the Production Plan.
Honor Apogee Prepress Hot Ticket PPD Settings
When this option is selected, Apogee will use the parameter set that is specified in the PPD section of the incoming document. This option is only for Hot Tickets.
doc. version 13.1.1