ECO3 Imagesetters and Platesetters
Apogee provides a Task Processor for each imagesetter and platesetter. The settings for each of those are grouped in two sets: Image Settings and Output Settings. They can be accessed by double-clicking the Parameter Sets icon for the selected Task Processor in the Resources pane of the System Overview window. For more information on the settings, see “Imagesetter and Platesetter Settings”.
Apogee supports the following ECO3 imagesetters and platesetters:
•Imagesetters:
 | Accuset 800, Accuset 1000, Accuset 1000W, Accuset 1500, Accuset 1500W, Accuset 1500 Plus (use the standard AccuSet 1500 Task Processor for the latter). |
 | Avantra 20, Avantra 25, Avantra 25E, Avantra 25S, Avantra 25XT, Avantra 30, Avantra 30E, Avantra 30S (use the standard Avantra 30 Task Processor for the latter), Avantra 36, Avantra 36S, Avantra 44, Avantra 44E, Avantra 44S, Avantra 44XT. |
 | Avanxis IV (SCSI) Avanxis IV PIF. |
 | Avanxis VIII, Avanxis XVIII (China only). (use the standard Avanxis VIII for the latter: There is a configuration setting to switch to the XVIII version). |
 | Phoenix 2000, Phoenix 2250, Phoenix News (Media Profile modes are not supported). |
 | Epson X500-CTF, Epson X900-CTF. |
NOTE: “Fill entire drum” ganging is not possible: Apogee only supports “Fill entire row”.
•Platesetters:
 | Acento E, Acento LF, Acento S, Acento II (PIF). |
 | Avalon LF, Avalon LF VIOLET (use standard Avalon LF Task Processor), Avalon VLF (50, 60, 70, 80 and 83), Avalon N4 Avalon N16-50-E, N16-50-S, N16-50-XT, Avalon N24-50-S/SD, N24-50-XT, N24-70-SD*, N24-70-XT, Avalon N36-50-S/SD, N36-50-XT, N36-70-SD*, N36-70-XT, Avalon N8-10-E, N8-10-S, N8-20-E, N8-20-S, N8-20-Sr, N8-50-E, N8-50-S, N8-50-XT, N8-70-XT, N8-80-XT, N8-90-E/S/XT. |
 | Galileo Classic, Galileo S, Galileo Talant, Galileo Thermal, Galileo ThermalS, Galileo VS, Galileo VS4, Galileo VXT. |
 | Palladio, Palladio E, Palladio 30 and 30 M (Manual) should all use the standard Palladio Task Processor (SCSI), Palladio II (PIF), Avalon V4. |
 | XCalibur 45, XCalibur E, XCalibur E Elite, XCalibur LE, XCalibur S, XCalibur S Elite, XCalibur XT, XCalibur XT Elite, XCalibur XXT (should all use the standard X45 Task Processor). XCalibur VLF 50, XCalibur VLF 60, XCalibur VLF 70, XCalibur VLF 80 (all available in E, S, XT, and XXT versions). |
 | Magis DI 1600. |
Supported Third-party Platesetters
The following third-party platesetters are supported by Apogee:
•Trendsetter
NOTE: When you are creating your Production Plan, a Collect for Output action is automatically added to the Output Task Processor. For more information, see “Collect for Output”.
Associated Resources
When you select a physical ECO3 output device Task Processor in the System Overview, the following associated resource categories are displayed in the Resources pane:
doc. version 13.1.1